3D Carbon Fiber Vinyl Wrap Sticker 12″ x 60″ Top Grade Bubble Free Air Release
12″ X 60″ (1ft. X 5ft.)Carbon Fiber Vinyl 3D
Biggest Selection on Ebay.. Color: You Choose Back up Top from: Black, Red, Gold, Silver, Blue, Orange, Purple, Green, Pink, Yellow, White, & Burgundy Huge Sale this Weekend Only, get it before the Price goes up
We Recommend Looking Up a Instructional Video on How to Apply Carbon Fiber Vinyl for best results, We have a few tips below as well.
auto vinyl wrap 3d carbon fiber film
Thickness  0.18mm Heat resistance  -50°C to +200°C Stretch rate   33+ pascal Mask thickness before embossing  11.5c Glue material   Imported removable glue Glue thickness  0.03mm Glue weight    30g/m2±2gm2 Gram weight of release paper   140gsm embossing paper Thickness of release paper  0.15-0.16mm Stand up against   water, dirt, grease, salt, weak acids oil Durability period     Indoor 7-8 years; outdoor: 5-6 years Compatibility   Die cutting,car decoration,architectural decoration These are instructions for how to wrap your automotive interior with carbon fiber vinyl. I have done this on a number of cars, and the technique can be applied to just about anything, some people even wrap their hood or trunk lid with this stuff. Materials/Tools needed: -carbon fiber vinyl -Scissors -X-acto knife or razor blade -Measuring tape -Plastic card for smoothing out bubbles (an old credit card will work, but it helps to smooth the edges a little) -Heat gun (hair dryer will work, but an adjustable heat gun is preferred) Step 1 Measure the trim Measure the trim as best you can leaving at least a half inch excess on each side of Step 2 Remove the Trim The “best” way to do this is to completely remove any trim from the Step 3 Applying The Vinyl Once you’ve cut all the pieces you need, start by removing the backing Once you’ve got the initial alignment done, you can start working it To wrap around contours, heat the vinyl a little until it is soft, then It helps at this point to notch the corners of the vinyl where the trim Make sure to use the heat gun when you fold the vinyl over to the backside, and it should hold extremely well once it cools. Step 4 Reinstall Trim Once you’ve wrapped all the trim, you can go ahead and reinstall it. If
|
color | Black, Blue, Buguny / Dark Red, Gold, Green, Orange, Pink, Purple, Red, Silver, White, Yellow |
---|